|
Product Details:
Payment & Shipping Terms:
|
| Standard: | API 5L(ISO 3183) PSL1/PSL2: GR.B-X80, GB/T 9711.1, GB/T 9711.2, ASTM A53: GR.A/GR.B, ASTM A500: GR.A/GR.B/GR.C/GR.D, ASTM A252 | Application: | Fluid Pipe |
|---|---|---|---|
| Technique: | ERW,Hot Rolled,Cold Drawn | Section Shape: | Round |
| Length: | 3m-17.4m | Out Diameter: | 114.3mm - 812.8mm (4"-32") |
| Thickness: | 4.0-22.0mm | Uses: | Welded Steel Pipes Use In The Petroleum And Natural Gas (oil & Gas) Industries |
| Alloy Or Not: | Non-alloy | Shape: | Round Shape |
| High Light: | PSL1 ERW Steel Pipe,ISO 3183 ERW Steel Pipe,OD 114.3mm Pipeline ERW Pipe |
||
Pipeline Transportation API 5L ISO 3183 PSL1 ERW Steel Pipe
Electric resistance welded (ERW) pipe is manufactured by cold-forming a sheet of steel into a cylindrical shape.Current is then passed between the two edges of the steel to heat the steel to a point at which the edges are forced together to form a bond without the use of welding filler material.Initially this manufacturing process used low frequency A.C. current to heat the edges. In Over time, the welds of low frequency ERW pipe was found to be susceptible to selective seam corrosion, hook cracks, and inadequate bonding of the seams, so low frequency ERW is no longer used to manufacture pipe. The high frequency process is still being used to manufacture pipe for use in new pipeline construction.
1. Thickness: 4.0-22.0mm
2. Length: 3m-18m
3. Out diameter: 114.3mm - 812.8mm (4"-32")
4. Standard: API 5L(ISO 3183) PSL1/PSL2: GR.B-X80, GB/T 9711.1, GB/T 9711.2, ASTM A53: GR.A/GR.B, ASTM A500: GR.A/GR.B/GR.C/GR.D, ASTM A252: GR.1/GR.2/GR.3, EN10219/EN10210: S275/S355JRH/J0H/J2H, AS/NZS 1163
5. Uses: Welded steel pipes for use in pipeline transportation system in the petroleum and natural gas (oil & gas) industries, water pipeline, structural & construction.
6. Type: ERW (Electric Resistance Welded) Steel Pipe, HFI (High Frequency Induction) Steel Pipe, HFW (High-Frequency Welding) Steel Pipe
7. Chemical Analysis (%):
| Standard | Type of pipe | Class | Grade |
C max |
Si max |
Mn max |
P max |
S max |
V max |
Nb max |
Ti max |
|
API SPEC 5L /ISO 3183 |
WELD | PSL1 | L245 B | 0.26 | - | 1.2 | - | 0.03 | 0.03 | - | - |
| L290/X42 | 0.26 | - | 1.3 | - | 0.03 | 0.03 | - | - | |||
| L320/X46 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | |||
| L360/X52 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | |||
| L390/X56 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | |||
| L415/X60 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | |||
| L450/X65 | 0.26 | - | 1.45 | - | 0.03 | 0.03 | - | - | |||
| L485/X70 | 0.26 | - | 1.65 | - | 0.03 | 0.03 | - | - | |||
| PSL2 | L245M/GR.BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
| L290M/X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | |||
| L320M/X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | |||
| L360M/X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | - | - | - | |||
| L390M/X56M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | - | - | - | |||
| L415M/X60M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | - | - | - | |||
| L450M/X65M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | - | - | - | |||
| L485M/X70M | 0.12 | 0.45 | 1.7 | 0.025 | 0.015 | - | - | - | |||
| L555M/X80M | 0.12 | 0.45 | 1.85 | 0.025 | 0.015 | - | - | - |
8. Mechanical Properties
| Standard | Class | Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) |
Y.S/T.S | |
| API SPEC 5L /ISO 3183 | PSL1 | L245/GR.B | min | 245 | 415 | b | - |
| L290/X42 | min | 290 | 415 | b | - | ||
| L320/X46 | min | 320 | 435 | b | - | ||
| L360/X52 | min | 360 | 460 | b | - | ||
| L390/X56 | min | 390 | 490 | b | - | ||
| L415/X60 | min | 415 | 520 | b | - | ||
| L450/X60 | min | 450 | 535 | b | - | ||
| L485/X70 | min | 485 | 570 | b | - | ||
| PSL2 |
L245N/BN L245M/BM |
min | 245 | 415 | b | - | |
| max | 450 | 760 | b | 0.93 | |||
|
L290N/X42N L290M/X42M |
min | 290 | 415 | b | - | ||
| max | 495 | 760 | b | 0.93 | |||
|
L320N/X46N L320M/X46M |
min | 320 | 435 | b | - | ||
| max | 525 | 760 | b | 0.93 | |||
|
L360N/X52N L360M/X52M |
min | 360 | 460 | b | - | ||
| max | 530 | 760 | b | 0.93 | |||
|
L390N/X56N L390M/X56M |
min | 390 | 490 | b | - | ||
| max | 545 | 760 | b | 0.93 | |||
|
L415N/X60N L415M/X60M |
min | 415 | 520 | b | - | ||
| max | 565 | 760 | b | 0.93 | |||
| L450M/X65M | min | 450 | 535 | b | - | ||
| max | 600 | 760 | b | 0.93 | |||
| L485M/X70M | min | 485 | 570 | b | - | ||
| max | 635 | 760 | b | 0.93 | |||
| L555M/X80M | min | 555 | 625 | b | - | ||
| max | 705 | 825 | b | 0.93 |
Our Advantage:
Huayang specialized in manufacturing welded carbon steel pipes for 14 years. The annual output is around 1,000,000 tons. Our products have been exported to 40 countries and regions till now, such as Canada, Hong Kong, Vietnam, Bangladesh, The U.A.E, America, Spain, Italy, Netherlands, Kuwait, Saudi Arabia etc. So any inquiry or special demands will get fast and most professional reply.
Why choose us?
1. We are API/ISO Certificated manufacturer.
2. Have cooperated with a lot of importers for more than 8 years.
3. Experienced in doing business with big customers.
4. Quick delivery time for decent orders.Near to Tianjin port.
5. Factory audited by SGS.
6. Free samples could be provided.
Contact Person: Sing Zhuan
Tel: +8615130808690
